The Changing the position of tires (Tire rotation) is an important measure to ensure even tire wear, better driving safety and a longer lifespan for your tires. In Switzerland, where summer and winter tires change seasonally, changing position regularly helps keep the car moving safely and comfortably.
💡 Tip: If you have the position change carried out professionally, you can also benefit from tire balancing, tire fitting and tire storage in the tire hotel - e.g. B. at SwissCarMarket in Illnau-Effretikon.
Why is changing the position of tires important?
A regular one Changing the position of tires ensures that all tires wear evenly. Advantages:
- Longer tire life
- Even wear, especially with front or rear wheel drive
- Improved traction and driving safety
- Reduced vibrations and more driving comfort
When is a position change recommended?
- Every 8,000-12,000 km or once per season
- During seasonal tire changes (summer/winter tires)
- In case of uneven wear or vibrations in the steering wheel
- For vehicles with four-wheel driveto ensure even wear
How do you change the position of tires correctly?
Step-by-step instructions:
- Park the car on level ground and pull the handbrake
- Loosen tires (loosen screws)
- Position the jack correctly and raise the car
- Change tires according to the rotation scheme (cross rotation, forward rotation, manufacturer's instructions)
- Tighten the screws hand-tight, lower the car, then tighten with torque
💡 If you are unsure, always contact a motor vehicle specialist Consult a tire professional.
In what order do you change tires when rotating tires?
The order depends on the vehicle type and tire type:
- Front wheel drive: Front tire diagonally backwards, rear tire straight forward
- Rear wheel drive: Rear tire diagonally forward, front tire straight backwards
- Four-wheel drive vehicles: Pay attention to manufacturer's instructions
Additional tips for changing the position of tires
- Position change left/right: Please note with asymmetrical tires or directional tires
- 7 degree rule: Some professionals recommend slight angle deviations during installation to reduce minimal vibration
- Tool: Jack, torque wrench, tire changer, jack stands if necessary
Changing the position of tires in Illnau-Effretikon at SwissCarMarket
For drivers in Illnau-Effretikon and the surrounding area SwissCarMarket a professional tire rotation in Illnau-Effretikon to. Our experienced team will ensure that your tires wear evenly, increasing driving safety and maximizing the life of your tires.
💡 Tip: Plan your appointment earlyto avoid waiting times and drive safely through Switzerland. SwissCarMarket will also take care of this on request Tire fitting, changing the position of tires, storing tires and repairing punctures at attractive prices (from 25 CHF).
FAQ – Changing the position of tires in Switzerland
Short answers to important questions about tire rotation in Switzerland
How often should you change tires in Switzerland?
A change of position of tires is usually every 8,000-12,000 km or recommended once per season. If the tires wear irregularly, changing them earlier may make sense. The Tire rotation ensures that all tires wear evenly.
Can I change position myself?
Theoretically yes, but it is a professional service safer and more efficient. Experts pay attention to proper order, rotation and balancing to avoid problems such as uneven wear or vibration.
What are the advantages of changing the position of the tires?
- Even tire wear
- Extended tire life
- Improved driving safety and driving comfort
- Optimal use of summer and winter tires
Does changing position affect driving safety?
Yes, a correctly performed tire position change ensures better grip, even contact with the road and reduces the risk of vibrations or unstable driving behavior.
Can changing position extend tire life?
Definitely. Through the regular Tire rotation Wear is evenly distributed, meaning tires can be used longer and need to be replaced less quickly.
How do you recognize that a change of position is urgently needed?
- Irregular tire wear
- Vibrations in the steering wheel or vehicle floor
- Significantly different tread depths between the front and rear axles
What is the 7 degree rule when changing tires?
The 7 degree rule states that tires should be rotated slightly outward or inward when changing positions to avoid uneven wear. This small adjustment ensures even tire wear, increases the Security and extends the Tire lifespan.
💡 Tip: If you are unsure, Have the tires changed position by a professional.
